User's Manual

Steps
When the access group sengs are changed, you need to apply the access groups to the devices
again to take eect. The access group changes include changes of template, access group sengs,
person's access group sengs, and related person details (including card number, ngerprint, face
picture, linkage between card number and
ngerprint, linkage between card number and
ngerprint, card password, card eecve period, etc).
1. Click Access Control → Authorizaon → Access Group to enter the Access Group interface.
2. Click Add to open the Add window.
3. In the Name text
eld, create a name for the access group as you want.
4. Select a template for the access group.
Note
You should congure the template before access group sengs. Refer to Congure Schedule
and Template for details.
5. In the le list of the Select Person eld, select person(s) to assign access authority.
6. In the le list of the Select Access Point eld, select door(s), door staon(s) or oor(s) for the
selected persons to access.
7. Click Save.
You can view the selected person(s) and the selected access point(s) on the right side of the
interface.
Figure 10-2 Display the Selected Person(s) and Access Point(s)
8. Aer adding the access groups, you need to apply them to the access control device to take
eect.
1) Select the access group(s) to apply to the access control device.
2) Click Apply All to Devices start applying all the selected access group(s) to the access control
device or door staon.
3) Click Apply All to Devices or Apply Changes to Devices.
DS-K1T343 Series Face Recognion Terminal User Manual
123