User's Manual

Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
●
Aer acvaon, you should select a language according to your actrual needs.
●
Aer acvaon, you should select an applicaon mode. For details, see Set Applicaon Mode .
●
Aer acvaon, if you need to set privacy, you should check the item. For details, see .
●
Aer acvaon, if you need to add administrator to manage the device parameters, you should
set administrator. For details, see
Add Administrator .
5.2 Acvate via Web Browser
You can acvate the device via the web browser.
Steps
1. Enter the device default IP address (192.0.0.64) in the address bar of the web browser, and press
Enter.
Note
Make sure the device IP address and the computer's should be in the same IP segment.
2. Create a new password (admin password) and conrm the password.
Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
Note
Characters containing admin and nimda are not supported to be set as acvaon password.
3. Click Acvate.
4. Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the
client soware.
5.3
Acvate via SADP
SADP is a tool to detect, acvate and modify the IP address of the device over the LAN.
Before You Start
●
Get the SADP soware from the supplied disk or the ocial website hp://
www.hikvision.com/en/ , and install the SADP according to the prompts.
●
The device and the PC that runs the SADP tool should be within the same subnet.
DS-K1T343 Series Face Recognion Terminal User Manual
15