User's Manual

8.5.16 Set Supplement Light Brightness
Set the device supplement light brightness.
Steps
1.
Click Conguraon → Image → Supplement Light Parameters .
2.
Select a supplement light type and mode from the drop-down list. If you select the mode as ON,
you should set the brightness.
8.5.17 Set Beauty Parameters
You can enable beauty camera and set the parameters.
Steps
1.
Click Conguraon → Image → Beauty Parameters .
2.
Check Enable Beauty Photos, and adjust the Whiten Level and Smoothing Skin Level according
to your actual needs.
8.5.18 Time and
Aendance Sengs
If you want to track and monitor when the persons start/stop work and monitor their working
hours and late arrivals, early departures,
me taken on breaks, and absenteeism, you can add the
person to the shi group and assign a shi schedule (a rule for the aendance dening how the
schedule repeats, the shi type, break sengs, and the card swiping rule.) to the shi group to
dene the aendance parameters for the persons in the shi group.
Disable
Aendance Mode via Web
Disable the aendance mode and the system will not display the aendance status on the inial
page.
Steps
1.
Click Conguraon → Aendance to enter the sengs page.
2.
Set the
Aendance Mode as Disable.
Result
You will not view or
congure the aendance status on the inial page. And the system will follow
the aendance rule that congured on the plaorm.
DS-K1T673 Series Face Recognion Terminal User Manual
95