User's Manual

8.6.17 Set Supplement Light Brightness
Set the device supplement light brightness.
Steps
1.
Click Conguraon → Image → Supplement Light Parameters .
Figure 8-12 Supplement Light Sengs Page
2.
Select a supplemen
t light type and mode from the drop-down list. If you select the mode as ON,
you should set the brightness.
8.6.18 Set Beauty Parameters
You can enable beauty camera and set the parameters.
Steps
1.
Click Conguraon → Imag
e → Beauty Parameters .
2.
Check Enable Beauty Photos, and adjust the Whiten Level and Smoothing Skin Level according
to your actual needs.
8.6.19 Set Fusion Parameters
You can enable the image fusion to improve the recognion
eect of low-light environment.
Steps
1.
Click Conguraon → Image → Image Fusion to enter the page.
2.
Set the mode as Automac or Disable.
Aut
o
DS-K1T690 Series Face Recognion Terminal User Manual
97