User's Manual

Note
●
If y
ou change the No., you should reboot the device.
●
The main door staon No. is 0, and the sub door staon No. ranges from 1 to 16.
Phase No.
Se
t the device phase No.
Building No.
Set the device building No.
Unit No.
Set the device unit No.
Note
If you change the No., you should reboot the device.
If set the device type as Out
er Door Staon, you can set the period No., outer door staon No.,
and community No.
Outer Door Staon No.
If you select outer door staon as the device type, you should enter a number between 1 and
99.
Note
If you change the No., you should reboot the device.
Phase No.
Se
t the device phase No.
Session Sengs
Enable the communicaon
between door staon, main staon, and video intercom server.
Steps
1.
Click Conguraon → In
tercom → Session Sengs to enter the sengs page.
DS-K1T690 Series Face
Recognion Terminal User Manual
107