User's Manual

Enable Temperature Detecon
When enabling the funcon, the device will authencate the permissions and at the same
me take the temperature. When disabling the device, the device will authencate the
permissions only.
Over-Temperature Alarm Threshold (Max./Min.)
Edit the threshold according to actual situaon. If the detected temperature is higher or
lower than the congured parameters, an alarm will be triggered. By default, the value is
37.3°.
Temperature Compensaon
If the measured temperature is higher/lower than the actual object's temperature, you can
set the compensaon temperature here. Available range: -99 °C to 99 °C.
Door Not Open When Temperature is Abnormal
When enabling the funcon, the door will not open when the detected temperature is higher
or lower than the congured temperature threshold. By default, the funcon is enabled.
Temperature Measurement Only
When enabling the funcon, the device will not authencate the permissions, but only take
the temperature. When disabling the funcon, the device will authencate the permissions
and at the same me take the temperature.
Cap
ture White Light Picture
Aer enabling Temperature Measurement Only, you can enable Capture White Light
Picture. Aer enabling this funcon, the device will capture white light picture.
Measur
e Area Sengs
Congure the temperature measurement area.
Unit
Select a temperature unit according to your preference.
4.
Click Save.
Black Body Sengs
The black body can correct the measuring temperature. You should set the black body parameters
if the black body t
emperature measurement scene is required. If no black body is required, do not
set the black body parameters, or the temperature may not correct.
Steps
1.
Click Conguraon → T
emperature → Black Body Sengs .
DS-K1T690 Series Face
Recognion Terminal User Manual
116