User's Manual

Note
●
The support
ed USB ash drive format is DB.
●
The system supports the USB ash drive with the storage of 1G to 32G. Make sure the free
space of the USB ash drive is more than 512M.
●
The exported user data is a DB le, which cannot be edited.
7.5 Identy
Authencaon
Aer network conguraon, system parameters conguraon and user conguraon, you can go
back to the inial page for identy authencaon. The system will authencate person according
to the congured authencaon mode.
7.5.1 Authencate via Single Credenal
Set the user authencaon type before authencaon. For details, see
Set Authencaon Mode .
Authencate
face, ngerprint, card or QR code.
Face
Face forward at the camera and start authencaon via face.
Fingerprint
Place the enrolled ngerprint on the ngerprint module and start authencaon via
ngerprint.
Card
Present the card on the card presenng area and start authencaon
via card.
Note
The card can be normal IC card, or encrypted card.
QR Code
Put the QR c
ode in front of the device camera to authencate via QR code.
Note
Authencaon via QR code should be supported by the device.
Password
En
ter the password to authencate via password.
If authencaon completed, a prompt "Authencated" will pop up.
Note
Aer enabling temperature
detecon, the device displays the temperature informaon.
DS-K1T690 Series Face Recognion Terminal User Manual
63