User's Manual

7.5.2 Authencate via Mulple Credenal
Before You Start
Set the user authencaon type before authencaon. For details, see Set Authencaon Mode .
St
eps
1.
If the
authencaon mode is Card and Face, Password and Face, Card and Password, Card and
Face and Fingerprint, authencate any credenal according to the instrucons on the live view
page.
Note
●
The c
ard can be normal IC card, or encrypted card.
●
If the QR Code Scanning funcon is enabled, you can put the QR code in front of the device
camera to authencate via QR code.
2.
Aer the previous credenal is authencated,
connue authencate other credenals.
Note
●
F
or detailed informaon about scanning ngerprint, see Tips for Scanning Fingerprint.
●
For detailed informaon about authencang face, see Tips When Collecng/Comparing Face
Picture.
●
Aer enabling temperature detecon, the device displays the temperature informaon.
If
authencaon succeeded, the prompt "Authencated" will pop up.
7.6 Basic Sengs
You can set the sound sengs, me sengs, beauty and sleeping (s).
Long t
ap on the inial page for 3 s and slide to the le/right by following the gesture and login the
device home page. Tap Basic.
Figure 7-10 Basic Sengs Page
DS-K1T690 Series Face Recognion Terminal User Manual
64