User's Manual

Figure 7-11 Temperature Measurement Parameters
The a
vailable parameters descripons are as follows:
T
emp. Detecon
When enabling the funcon, the device will authencate the permissions and at the same me
take the temperature. When disabling the device, the device will authencate the permissions
only
.
Normal Temp.
Edit the threshold according to actual situaon. If the detected temperature is higher or lower
than the congured parameters, an alarm will be triggered. By default, the minimum value is
1 °C and the ma
ximum value is 45 °C.
Temperature Compensaon
If the measured temperature is higher/lower than the actual object's temperature, you can set
the compensaon temperature here. Available range: -99 to 99.
Note
You can select the unit as celsius degree or fahrenheit degree.
Door Not Open (Abnormal Temperature)
When enabling the funcon, the door will not open when the detected temperature is higher or
lower than the congured temperature threshold. By default, the funcon is enabled.
T
emp. Measurement Only
When enabling the funcon, the device will not authencate the permissions, but only take the
temperature. When disabling the funcon, the device will authencate the permissions and at
the same me take the temperature.
DS-K1T690 Series Face Recognion Terminal User Manual
68