User's Manual

2) Select the imporng path, and click Import.
7. Click Save to save the sengs.
8.5.15 Set Image Parameters
Set the video standard, WDR, brightness, contrast, and saturaon.
Steps
1. Click Conguraon → Image Adjustment .
2. Congure the parameters to adjust the image.
Video Standard
Set the video frame rate when performing live view remotely. Aer changing the standard,
you should reboot the device to take eect.
PAL
25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East
countries, Europe countries, etc.
NTSC
30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the
Philippines, etc.
WDR
Enable or disable the WDR funcon.
When there are both very bright and very dark areas simultaneously in the view, WDR
balances the brigh
tness level of the whole image and provide clear images with details.
Brightness/Contrast/Saturaon
Drag the block or enter the value to adjust the live video's brightness, contrast and
saturaon.
Start/end recording video.
Capture the image.
3. Click De
fault to restore the parameters to the default sengs.
8.5.16 Set Supplement Light Brightness
Set the device supplement light brightness.
St
eps
1. Click Conguraon → Image → Supplement Light Parameters .
DS-K1T981 Series Access Control Terminal User Manual
89