User's Manual

Figure 8-10 Supplement Light Sengs Page
2. Select a supplemen
t light type and mode from the drop-down list. If you select the mode as ON,
you should set the LED light brightness.
8.5.17 Time and Aendance Sengs
If you want to track and monitor when the persons start/stop work and monitor their working
hours and late arrivals, early departures, me taken on breaks, and absenteeism, you can add the
person to the shi group and assign a shi schedule (a rule for the aendance dening how the
schedule repeats, the shi type, break sengs, and the card swiping rule.) to the shi group to
dene the
aendance parameters for the persons in the shi group.
Disable Aendance Mode via Web
Disable the aendance mode and the system will not display the aendance status on the inial
page.
St
eps
1. Click Conguraon → Aendance to enter the sengs page.
2. Set the Aendance Mode as Disable.
Result
You will not view or congure the aendance status on the inial page. And the system will follow
the aendance rule that congured on the plaorm.
Time Sengs
Steps
1. Click Conguraon → Time Sengs to enter the sengs page.
2. Select St
atus Type.
DS-K1T981 Series Access Control Terminal User Manual
90