User's Manual

4. Click Save to save the sengs.
Note
If you change the peripheral, and aer you save the device parameters, the device will reboot
automacally.
8.5.21 Iris Sengs
Steps
1. Click Conguraon → Smart → Smart .
2. Se
t card reader type.
3. Drag the block to adjust the iris recognion interval and iris 1:N security level.
Iris Recognion Interval
The me interval between two connuous face recognions when authencang.
Iris 1:N Security Level
Set the matching threshold when authencang via 1:N matching mode. The larger the value,
the smaller the false accept rate and the larger the false rejecon rate.
4. Set the single-eye or dual-eye recognion mode.
Single-eye Recognion Mode
Single-eye recognion mode allows you to authencate via single eye.
Dual-e
ye Recognion Mode
Dual-eye recognion mode allows you to authencate via dual eyes.
5. Click Save to save the sengs
aer the conguraon.
8.5.22 Set Biometric Parameters
Set Basic Parameters
Click Conguraon → Smart → Smart .
Note
The
funcons vary according to dierent models. Refers to the actual device for details.
DS-K1T981 Series Access Control Terminal User Manual
104