User's Manual

3) Oponal: Click Add to add a new holiday.
Note
For details about adding a holiday, refer to Add Holiday .
4) Oponal: Select a select
ed holiday in the right list and click
to remove the selected one, or
click Clear t
o clear all the selected holiday(s) in the right list.
7. Click Save to save the sengs and nish adding the template.
9.6 Set Access Group to Assign Access Authorizaon to Persons
Aer adding the person and conguring the person's credenals, you can create the access groups
to dene which person(s) can get access to which door(s) and then apply the access group to the
access control device to take eect.
Before You Start
●
Add person to the client.
●
Add access control device to the client and group access points. For details, refer to
Group
Management .
●
Add t
emplate.
Steps
When the access group sengs are changed, you need to apply the access groups to the devices
again to take eect. The access group changes include changes of template, access group sengs,
person's access group sengs, and related person details (including card number, ngerprint, face
pictur
e, linkage between card number and ngerprint, linkage between card number and
ngerprint, card password, card eecve period, etc).
1. Click Access Control → Authorizaon → Access Gr
oup to enter the Access Group interface.
2. Click Add to open the Add window.
3. In the Name text eld, create a name for the access group as you want.
4. Select a template for the access group.
Note
You should congure
the template before access group sengs. Refer to
Congure Schedule
and Template f
or details.
5. In the
le list of the Select Person eld, select person(s) to assign access authority.
6. In the le list of the Select Access Point eld, select door(s), door staon(s) or oor(s) for the
select
ed persons to access.
7. Click Save.
You can view the selected person(s) and the selected access point(s) on the right side of the
interface.
DS-K1T981 Series Access Control Terminal User Manual
124