User's Manual

You can click the prompt to apply the changed data to the device. You can select either Apply
Now or Apply Later.
Figure 9-3 Data Synchronizaon
9.7 Congure Advanced Funcons
You can congure
the advanced funcons of access control to meet some special requirements in
dierent scene, such as mul-factor authencaon, an-passback, etc.
Note
●
F
or the card related funcons(the type of access control card/mul-factor authencaon), only
the card(s) with access group applied will be listed when adding cards.
●
The advanced funcons should be supported by the device.
●
Hover the cursor on the Advanced Funcon, and then Click
to customize the advanced
funcon(s) to be displayed.
9.7.1 Congure Device Parameters
Aer adding the access control device, you can congure the parameters of access control device
(access c
ontroller), access control points (door or oor), alarm inputs, alarm outputs, card readers
and lane c
ontroller.
Congure Parameters for Access Control Device
Aer adding the access control device, you can congure its parameters, including overlaying user
informaon on picture, uploading pictures aer capturing, saving captured pictures, etc.
Before You Start
Add access control device to the client.
Steps
1. Click Access Control → Advanced Funcon → De
vice Parameter .
DS-K1T981 Series Access Control Terminal User Manual
126