User's Manual

Parameter Descripon
Must Wear
If the person do not wear the hard hat when authencang, the
device will pop up a prompt and the door will keep closed.
None
If the person do not wear the hard hat when authencang, the
device will not prompt a nocaon.
Face with Mask
Detecon
Aer enabling the face with mask detecon, the system will recognize
the captured face with mask picture. You can set face with mask & face
1:N level and the strategy.
Reminder of Wearing
If the person do not wear a face mask when authencang, the
device prompts a nocaon and the door will open.
Must Wear
If the person do not wear a face mask when authencang, the
device prompts a nocaon and the door keeps closed.
None
If the person do not wear a face mask when authencang, the
device will not prompt a nocaon.
Long tap on the inial page for 3 s and login the home page. Tap Biometric and tap Iris to enter the
page.
Table 7-2 Iris Parameters
Parameter Descripon
Iris
Recognion
Interval
The me interval between two connuous iris recognions when
authencang.
Iris Recognion Mode Iris recognion mode consists of single-eye mode and dual-eye mode.
Iris 1:N Security Level Set the matching threshold when authencang via 1:N matching mode.
The larger the value, the smaller the false accept rate and the larger the
false rejecon rate.
7.8 Set Access Control Parameters
You can set the access control permissions, including the funcons of authencaon mode, enable
NF
C card, door contact, open duraon (s) and authencaon interval (s).
On the Home page, tap ACS (Access Control Sengs) to enter the Access Control Sengs page.
Edit the access control parameters on this page.
DS-K1T981 Series Access Control Terminal User Manual
61