User's Manual

DNS Server
Set the preferred DNS server and the Alternate DNS server according to your actual need.
Set Port Parameters
Set the HTTP, RTSP, HTTPS and Server port parmaeters.
Click Conguraon → Network → Basic Sengs → Port .
HTTP
It refers to the port through which the browser accesses the device. For example, when the
HTTP Port is modied to 81, you need to enter hp://192.0.0.65:81 in the browser for login.
RTSP
It refers to the port of real-me streaming protocol.
HTTPS
Set the HTTPS for accessing the browser. Cercate is required when accessing.
Server
It refers to the port through which the client adds the device.
Set Wi-Fi Parameters
Set the Wi-Fi parameters for device wireless
connecon.
Steps
Note
The
funcon should be supported by the device.
1. Click Conguraon → Network → Basic Sengs → Wi-Fi .
Figure 8-6 Wi-Fi Sengs Page
2. Check Wi-Fi.
3. Select a Wi-Fi
-
Click of a Wi-Fi in the list and enter the Wi-Fi password.
-
Click Add and en
ter a Wi-Fi's name, password, and encrypon type. Click Connect. When the
Wi-Fi is c
onnected, click OK.
4. Oponal: Set the WLAN parameters.
1) Click TCP/IP Sengs.
DS-K1T981 Series Access Control Terminal User Manual
83