User's Manual

Note
Hik-Connect is an applicaon for mobile devices. With the App, you can view live image of the
de
vice, receive alarm nocaon and so on.
3. Check the checkbo
x of Enable to enable the funcon.
4. Oponal: Check the checkbox of Custom, and you can set the server address by yourself.
5. Create a Stream Encrypon/Encrypon Key for the device.
Note
6 to 12
leers (a to z, A to Z) or numbers (0 to 9), case sensive. You are recommended to use a
combinaon of no less than 8 leers or numbers.
6. Click Sa
ve to enable the sengs.
Congure HTTP Listening
The device can send alarm informaon to the desnaon IP or host via HTTP protocol/HTTPS
protocol.
Before You Start
The desnaon IP or host name should support the HTTP protocol/HTTPS protocol to receive the
alarm informaon.
Note
The
funcon should be supported by the device.
Steps
1. Click Conguraon → Ne
twork → Advanced → HTTP Listening .
2. Edit the desnaon IP or host name, URL and port.
3. Oponal: Click Test to test whether the entered IP address or host name are valid.
4. Oponal: Click Default to reset the desnaon IP or host name.
5. Click Save.
8.5.13 Set Video and Audio Parameters
Set the image quality, resoluon, and the device volume.
Set Video Parameters
Click Conguraon → Video/
Audio → Video .
DS-K1T981 Series Access Control Terminal User Manual
85