User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring
- 3 Installation
- 4 Activation
- 5 Configuration via Client Software
- 5.1 Device Management
- 5.2 Live View via Door Station
- 5.3 Remote Configuration
- 5.4 Organization Management
- 5.5 Person Management
- 6 Video Intercom Operation
- A. Communication Matrix and Device Command
•
On the main page of the touch-display module, tap and enter the No. to
call.
•
On the main page of the touch-display module, tap to select a contact in
the list to call.
Note
Two themes of the main page are supported. You can change it remotely via
client soware.
6.1.2 Issue Card
Before You Start
Make sure you have issue the card locally or remotely. See Person Management for
issuing card via Client soware for details.
Issue Card via Main Card: You can swipe card to issue it aer swiping the main card
in advance.
Steps
1.
Present the main card on the card reading area, and hear two beeps.
2.
Present the unauthorized sub cards in turn aer hearing a beep.
3.
Present the main card again to end the card issuing process.
Note
•
DS-KD-M/DS-KD-TDM supports Mifare card, DS-KD-E/DS-KD-TDE supports
EM card.
•
If the amount of sub cards exceeds 10000, no more sub cards can be issued.
•
Up to 5 sub cards can be issued once. The issued frequency is no more than
2000.
6.1.3 Unlock Door
Unlock Door by Password
You can unlock the door by entering the password via the keypad module or
touch-display module.
Video Intercom Module Door
Staon User Manual
93