User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring
- 3 Installation
- 4 Activation
- 5 Configuration via Client Software
- 5.1 Device Management
- 5.2 Live View via Door Station
- 5.3 Remote Configuration
- 5.4 Organization Management
- 5.5 Person Management
- 6 Video Intercom Operation
- A. Communication Matrix and Device Command
Before You Start
Figure 3-44 Mounng Frame
Note
•
It takes two three-module mounng frames. The dimension of three-module
mounng frame (W × H × D) is: 320.8 mm × 107 mm × 32.7 mm.
•
The dimensions above are for reference only. The actual size can be slightly
dierent from the theorecal dimension.
Steps
1.
Paste two
Scker 1 onto the wall. Make sure the sckers are placed horizontally
via measuring with the gradienter.
2.
Drill 8 holes according to the screw holes on the scker.
Note
•
The suggested size of hole is 6 (diameter) × 25 (depth) mm.
•
The suggested length of cables le outside is 270 mm.
3.
Pull out the cable through the cable hole of the le scker.
Video Intercom Module Door
Staon User Manual
41