User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring
- 3 Installation
- 4 Activation
- 5 Configuration via Client Software
- 5.1 Device Management
- 5.2 Live View via Door Station
- 5.3 Remote Configuration
- 5.4 Organization Management
- 5.5 Person Management
- 6 Video Intercom Operation
- A. Communication Matrix and Device Command
Steps
1.
Drill the installaon hole, and pull the cable out.The suggested dimension of
installaon hole is 321.8 (W) × 315 (H) × 45.5 (D) mm. The suggested length of
cables le outside is 270 mm.
Figure 3-54 Cave the
Installaon Hole
2.
Connect two gang boxes as below.
Figure 3-55 Connect Two Gang Boxes
3.
Select a cable entry and remove the plasc sheet.
Video Intercom Module Door
Staon User Manual
48