User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring
- 3 Installation
- 4 Activation
- 5 Configuration via Client Software
- 5.1 Device Management
- 5.2 Live View via Door Station
- 5.3 Remote Configuration
- 5.4 Organization Management
- 5.5 Person Management
- 6 Video Intercom Operation
- A. Communication Matrix and Device Command
To operate and congure the device via LAN (Local Area Network), you need connect
the device in the same subnet with your PC. You can edit network parameters via
iVMS-4200 client soware.
Steps
1.
Select an online acvated device and click the Modify Nenfo.
2.
Edit the device IP address and gateway address to the same subnet with your
computer.
3.
Enter the password and click OK to save the network parameters modicaon.
Note
•
The default port No. is 8000.
•
The default IP address of the door staon is 192.0.0.65.
•
Aer eding the network parameters of device, you should add the devices
to the device list again.
Video Intercom Module Door Staon User Manual
55