User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring
- 3 Installation
- 4 Activation
- 5 Configuration via Client Software
- 5.1 Device Management
- 5.2 Live View via Door Station
- 5.3 Remote Configuration
- 5.4 Organization Management
- 5.5 Person Management
- 6 Video Intercom Operation
- A. Communication Matrix and Device Command
-
Set the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway
manually.
3.
Congure the corresponding DNS server parameters.
4.
Click Save to enable the sengs.
Port Sengs
Steps
1.
Click Network → Basic Sengs → Port to enter the sengs page.
Figure 5-7 Port Sengs
2.
Set the ports of the device.
HTTP Port
The default port number is 80, and it can be changed to any port No. which
is not occupied.
HTTPS Port
The default port number is 443, and it can be changed to any port No. which
is not occupied.
RTSP Port
The default port number is 554.
Server Port
The default server port number is 8000, and it can be changed to any port
No. ranges from 2000 to 65535.
3.
Click Save to enable the
sengs.
SIP
Seng
Video Intercom Module Door Staon User Manual
66