User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring
- 3 Installation
- 4 Activation
- 5 Configuration via Client Software
- 5.1 Device Management
- 5.2 Live View via Door Station
- 5.3 Remote Configuration
- 5.4 Organization Management
- 5.5 Person Management
- 6 Video Intercom Operation
- A. Communication Matrix and Device Command
1) Check the checkbox to enable BLC.
2) Select BLC Area.
6.
Click Save to enable the sengs.
OSD Sengs
You can customize the camera name, me/date format, display mode, and OSD size
displayed on the live view.
Steps
1.
Click Image → OSD Sengs to enter the sengs page.
2.
Check the corresponding checkbox to select the display of camera name, date or
week if required.
3.
Edit the Camera Name.
4.
Select from the drop-down list to set the Time Format and Date Format.
5.
Adjust the OSD posion.
6.
Click Save to enable the sengs.
Target Cropping
Steps
1.
Click Image → Crop to enter the page.
2.
Check Enable Target Cropping to enable the funcon.
3.
Click to crop photo.
4.
Click to crop video.
5.
Select Cropping Resoluon.
6.
Click Save.
Note
•
You can select Cropping Resoluon as 704*576, 1280*720, or 1920*1080.
•
You can zoom in or zoom out the image by selecng Cropping
Resoluonaer clicking Save.
5.3.7 Schedule Sengs
Video Intercom Module Door Staon User Manual
73