User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring
- 3 Installation
- 4 Activation
- 5 Configuration via Client Software
- 5.1 Device Management
- 5.2 Live View via Door Station
- 5.3 Remote Configuration
- 5.4 Organization Management
- 5.5 Person Management
- 6 Video Intercom Operation
- A. Communication Matrix and Device Command
Figure 5-17 Device No. Sengs
2.
Select the device type from the drop-down list, and set the corresponding
informaon including Building No., Floor No., Door Staon No., Community No.
and Unit No.
Note
When you select Outer Door Staon as Device Type, only Outer Door Staon
No. and Community No. can be set.
3.
Click Save to enable the device number conguraon.
Note
•
For main door staon (D series or V series), the No. is 0.
•
For sub door staon (D series or V series), the No. cannot be 0. The No.of
sub door staon ranges from 1 to 99.
•
For each villa or building, at least one main door staon (D series or V series)
should be
congured, and one sub door staons (D series or V series) can be
customized.
•
For one main door staon (D series or V series), up to 8 sub door staons
can be congured.
Linked Network Sengs
Steps
1.
Go to Intercom → Session
Sengs to enter the sengs page.
2.
Set Register Number and Registraon Password.
Video Intercom Module Door
Staon User Manual
76