User's Manual
Table Of Contents
- Legal Information
- Symbol Conventions
- Regulatory Information
- 1 Appearance
- 2 Terminal and Wiring
- 3 Installation
- 4 Activation
- 5 Configuration via Client Software
- 5.1 Device Management
- 5.2 Live View via Door Station
- 5.3 Remote Configuration
- 5.4 Organization Management
- 5.5 Person Management
- 6 Video Intercom Operation
- A. Communication Matrix and Device Command
3.
Set Main Staon IP and VideoIntercom Server IP.
4.
Enable Protocol 1.0.
5.
Click Save to enable the sengs.
Time Parameters
Go to Intercom → Time Parameters to enter the page.
Congure Max. Call Duraon, Max. Message Duraon, Max. Ring Duraon, and
click Save.
Note
•
Max. call duraon between the module indoor staon and client ranges from 90
s to 120 s. The call will end automacally when the actual calling duraon is
longer than the congured one.
•
Max. message duraon ranges from 30 s to 60 s. The message will end
automacally when the actual message duraon is longer than the congured
one.
•
Max. ring duraon refers to the maximum duraon of the module indoor staon
when it is called without being accepted. Max. ring duraon ranges from 65 s to
255 s.
Ring-Back Tone Sengs
Click Intercom → Ringbacktone Sengs to enter the sengs page.
Click Add to select the ring tone from PC.
Note
Available Audio Format: WAV、AAC, Size: Less than 600 KB, Sample Rate: 8000Hz,
Mono.
Press Buon to Call
Steps
1.
Go to Intercom → Press
Buon to Call to enter the sengs page.
Video Intercom Module Door
Staon User Manual
77