Instructions / Assembly

7
ASSEMBLY INSTRUCTIONS
Hardware Used
AA
BB
Hardware Used
EE
1
2
3
TT
1. Assemble the wheel bracket to the base with 4pcs
M6X12 bolt (BB) and 4pcs M6 nut (AA). (see step 1). Assemble the
other bracket in the same way.
Assemble the wheel to the bracket with 1pc M8X45 bolt (DD), 1pc
Φ8 Washer (HH) and M8 Nut (CC) (see step 2). Assemble the
other wheel in the same way.
Wheel assembly completed as shown in figure 1 step 3.
Note: To improve stability, the preassembled bucket (N)
can be filled with sand or water (not included).
2. Attach cylinder housing (C) to base (J) with
M5 x 8 mm screws (EE).
3. Open the preassembled door (D) on cylinder housing
(C) and place post (E) through the hole on the top.
x 8
M6 x 12 mm Bolt
HH
Φ8 Washer
M6 Nut
x 8
x 4
M5 x 8 mm Screw
x 4
E
D
C
J
H
I
C
J
EE
Fill sand
DD
HH
CC
AA
BB
CC
DD
x 2
M8 x 45 mm Bolt
M8 Nut
x 2
STEP 1
STEP 2
STEP 3