Instructions / Assembly

8
ASSEMBLY INSTRUCTIONS
Hardware Used
4
4. Secure post (E) to cylinder housing (C) using the
reinforced ring (MM), M6 x 10 mm bolts (FF) and
Φ6 small flat washers (GG). Fasten and cover
with the deco ring (NN).
MM
GG
MM
Φ6 Small Flat Washer
x 4
x 1
Reinforced Ring
NN
x 1
Deco Ring
NN
E
C
FF
M6 x 10 mm Bolt
x 4
B
E
KK
B
KK
II
HH
Hardware Used
KK
5
x 4
Stainless Steel Bolt
5. Attach reflector spacers (II) and Ø8 washers(HH) to
the top of head assembly (B). Tighten the reflector
spacers (II).
Unscrew stainless steel bolts (KK) from head
assembly (B).
6
HH
x 3
Φ8 Washer
II
x 3
Reflector spacer
Hardware Used
KK
x 4
Stainless Steel Bolt
6. Insert hose of head assembly (B) into post (E). Secure
head assembly (B) to post (E) with stainless steel
bolts (KK).
Note: The control knob on head assembly (B) should
be above the decal on post (E).