Instructions / Assembly

10
ASSEMBLY INSTRUCTIONS
Hardware Used
DD
LL
10
10. Use Phillips screwdriver (LL) to install
side panels (H) to bottom of assembly with
M5 x 12 mm screws (DD).
Note: Do not cover the panel where the
magnet is.
x 12
Phillips
Screwdriver
M5 x 12 mm Screw
x 1
H
DD
9
Hardware Used
DD
FF
x 3
x 3
x 1
Fixing Bracket
LL
Phillips
Screwdriver
M5 x 12 mm Screw
F B
DD
FF
9. Assebmly the protective guard and mesh
Insert the hooks of protective guard (F) to the
holes of upper supports (E).
Put the mesh (B) on the top plate (D). Make sure
the screw holes align the holes of top plate (D).
Use Phillips screwdriver (LL) to secure the
mesh (B) and protective guard (F) to the top
plate (D) with M5 x 12 mm screws (DD) and
fixing bracket (FF).