Instructions / Assembly

11
ASSEMBLY INSTRUCTIONS
12
12. Carefully lean the assembly and attach
reflector (A) to mesh (B) with studs (CC),
small flat washers (BB) on either side of
reflector (A) and then wing nuts (AA).
Gently return the assembly to the upright
position.
Hardware Used
AA
BB
x 3
x 6
Small Flat
Washer
Wing Nut
A
AA
CC
BB
CC
x 3
Stud
11.Install the knob (GG) to M4x6 screw (HH).
Hang the chain (II) to the hole on the control
box assembly (J) and put the pothook of front
panel to the holes of bottom plate.
Hardware Used
x 1
GG
Knob
HH
LL
x 1
x 1
Philips
screwdriver
Screw M4 X 6
x 1
II
Chain
11
J
HH
II
GG