Manualshelf

Installation Manual

ManualsBrandsHillsdale Furniture ManualsBedsHillsdale Furniture 1332BFR Huntley Bed Set Full Bronze
1
STEP 2
Next, attach each Headboard Post (K) to the Headboard Grill (J) using 2 Counter Bolts (C) per each side.
Tighten all bolts using the Allen Wrench (H) that has been provided. See Main Figure.
STEP 3
Attach the Post Rail (M) to each Wrap Post (L) by aligning the holes with the holes on the Bed Frame (*Not
Included) and secure each using 2 Allen Bolts (B), 2 Spring Washers (E) & 2 Flat Washers (F) per each side.
Tighten all bolts. See Figure A.
STEP 4
Attach Bed Frame (*Not Included) to each Headboard Post (K) using 2 Counter Bolts (A) from the backside,
2 Flat Washers (F), 2 Spring Washers (E) & 2 Hex Nuts (D) per each side. Tighten nuts using the Hex Wrench
(G) that has been provided. See Figure B. The assembly is now complete.
Date: 05-04-07
FURNITURE, LLC.
HILL
SD
ALE
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure
that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult
assembly is required. Customer Service Phone Number: 502-562-0000
HARDWARE LIST
(4) Counter Bolts 1/4 x 2-3/4
(4) Allen Bolts 1/4 x 1
(4) Counter Bolts 1/4 x 1-1/4
(4) Hex Nuts 1/4
(8) Spring Washers 1/4
(8) Flat Washers 1/4
(1) Hex Wrench
(1) Allen Wrench
A
B
C
D
E
F
G
H
PARTS LIST
(1) Headboard Grill
(2) Headboard Posts
(2) Wrap Posts
(1) Post Rail
(6) Top Finials
J
K
L
M
N
A
CARE & MAINTENANCE
:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for
polishing, as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
FIGURE A
BH
HUNTLEY WRAP BED
Model #1332-461 Full Size
Model #1332-501 Queen Size
Model #1332-661 King Size
Model #1332-111 Wrap Post Kit
B
E
F
B
E
F
FIGURE B
A
A
MAIN FIGURE
CDEF
G
J
K
M
K
L
L
C
C
N
N
N
N
N
N
E
F
D
E
F
D
A
A
STEP 1
Begin assembly by attaching each Top Finial (N) to
the top of each Headboard Post (K) and each Wrap
Post (L) by firmly screwing each in place. Do not
overtighten. See Main Figure.

Summary of content (1 pages)