Instructions / Assembly

ManualsBrandsHillsdale Furniture ManualsBunk & Loft BedsRockdale Twin Over Full Kids Bunk Bed

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all

components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.

The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000

CARE & MAINTENANCE

The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,

as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.

Date: 11-19-2013

Page 1 of 4

ROCKDALE BUNK BED

Model #1608/1688

STEP 1

Begin assembly by connecting

the Back Post (K) to the Upper

and Lower Panels (L & M) with 2

Long Screw Bolts (H) for each.

Then attach the Front Post

Headboard & Footboard (J) to the

Upper and Lower Headboard &

Footboards (L & M) with 2 Long

Screw Bolts (H) for each.

Finished piece seen in Figure 1.

QTYPART

16A

62E

HARDWARE QTYPART HARDWARE

16G

16H

24I

HARDWARE LIST

(16)

(4)

(8)

(62)

(1)

(16)

(24)

Long Bolt 6.3x80

Half Round Nut

Short Bolt 6.3x35

Short Screw Bolt 7x80

Screw 4x35

Allen Key

Screw 4x25

Long Screw Bolt 7x100

Wood Connect 010x40

PIECES LIST

(2)

(1)

(2)

(4)

(1)

(2)

(1)

(4)

(2)

Front Post

Back Post

Upper Panel

Lower Panel

Upper Front Rail

Back Rail

Guard Rail

Upper Slats

Lower Slats

Ladder

Guard Rail Supports

Lower Front Rail

Side DRW Panels

Back DRW Panels

Bottom DRW Panels

Front DRW Panels

FIGURE 1

STEP 2

Repeat the instructions from step 1 to assemble

the second side.

TEAMWORK NEEDED

FOR ASSEMBLY

Summary of content (5 pages)

PAGE 1
ROCKDALE BUNK BED Date: 11-19-2013 Page 1 of 4 Model #1608/1688 Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required. The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000 HARDWARE LIST A (16) Long Bolt 6.
PAGE 2
ROCKDALE BUNK BED Date: 11-19-2013 Page 2 of 4 Model #1608/1688 K J I FIGURE 2 B P P O I P D D O I I N U D A O STEP 4 Attach the Back Rails (O) to the Back Post Headboard & Footboard (K) using 2 Long Bolts (A). See Figure 2. STEP 5 Repeat steps 1-5 to secure the remaining panel to all the rails. STEP 6 Attach the Upper Front Rail (N) and the Lower Front Rail (U) with 2 Long Bolts (A) on to the Front Post Footboard (J).
PAGE 3
ROCKDALE BUNK BED Model #1608/1688 Date: 11-19-2013 Page 3 of 4 FIGURE 4 E Q O STEP 10 Next attach the Lower Slats (R) to the Bottom Back Rail (O) and the Lower Front Rail (U) by using 2 Long Screws (E) for each slat. Q O STEP 11 Attach the Upper Slats (Q) to the Upper Back Rail (O) and the Upper Front Rail (N) by using 2 Long Screws (E) for each slat. See Figure 4. N O R U G STEP 12 Attach the Side DRW Panels (V) to the Back DRW Panel (W) by using 2 Short Screws (G).
PAGE 4
ROCKDALE BUNK BED Model #1608/1688 Y Date: 11-19-2013 Page 4 of 4 G STEP 14 G Next place the Front DRW Panels onto the assembled drawers and secure with 2 Short Screws (G) on either side. G G STEP 15 Finally place the Drawers underneath the bed. Line them up with the blocks on the Lower Front Rail (U) and carefully slide them into place. The assembly is now complete. U CARE & MAINTENANCE: The touch of a soft cloth is all the maintenance the finish will ever need.
PAGE 5
Keep these instructions for future reference. ! IMPORTANT ! To help prevent serious or fatal injuries from entrapment or falls: Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed. Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.