Installation Guide

STEP 1
Begin assembly by attaching the Chair Back (K) to the
Seat Frame (L) using 2 Allen Bolts (A), 2 Spring Washers
(E) & 2 Flat Washers (F) per each corner from the bottom,
and 1 Allen Bolt (C), 1 Spring Washer (E) & 1 Flat Washer
(F) in the center from the bottom. Tighten all bolts using
the Allen Wrench (I) that has been provided.
STEP 3
Finish securing each Side Arm (M) to the Chair Back (K) by aligning holes and
securing from the back using 1 Allen Bolt (C) & 1 Spring Washer (E). Tighten
all bolts from Steps 1 through 3.
STEP 4
Next insert the Gas Lift (O) into the center area of the Leg Base (P) and push
in place. Connect the Gas Lift (O) to the bottom of the Metal Plate (N) by
screwing in place.
NOTE:
The lever on the
metal plate needs to
be on the left side
facing in order to
engage the gas lift.
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 06-23-2017
Page 1 of 1
PALM SPRINGS WOOD GAME CHAIR
Model #101052-102635 (4185-800)
HARDWARE LIST
A (4) 1/4” x 2-3/4” Allen Bolts
B (4) 1/4” x 2” Allen Bolts
C (3) 1/4” x 1-1/2” Allen Bolts
D (4) 1/4” x 1” Allen Bolts
E (15) Spring Washers
F (13) Flat Washers
G (2) Wood Plugs
H (5) Casters
I (1) Allen Wrench
J (1) Open Wrench
PARTS LIST
K (1) Chair Back
L (1) Seat Frame
M (2) Side Arms
N (1) Metal Plate
O (1) Gas Lift
P (1) Leg Base
QTYPART
15E
2G
HARDWARE QTYPART HARDWARE
13
5
F
H
1J
3C 4D
4A 4B
1I
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
HDFBP
AA
B
B
C
C
C
C
C
C
D
D
E
E
E
E
E
E
F
F
E
E
F
F
E
E
E
E
F
F
F
F
D
D
E
E
F
F
D
D
E
E
F
F
G
G
G
G
H
H
K
L
M
M
N
O
P
STEP 2
Next attach each Side Arm (M) to each side of the Seat Frame
(L) by aligning the holes and securing each from the bottom with
2 Allen Bolts (B), 2 Spring Washers (E) & 2 Flat Washers (F) per
each arm. Do not fully tighten bolts.
STEP 5
Attach the Metal Plate (N) to the bottom
of the Chair Frame (L) with 4 Allen
Bolts (D), 4 Spring Washers (E) & 4
Flat Washers (F) to secure in place.
STEP 6
Finally attach each Caster (H) to each
leg bottom and tighten using the Hex
Wrench (J) that has been provided.
Insert Wood Plugs (G) to cover bolt
heads from Step 2. The assembly is
now complete.
* IMPORTANT *
Please remove the cap off the top
before assembly