Installation Guide

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 08-21-2013
Page 1 of 1
PARK VIEW GAME CHAIR
Model #4186-800 Wood Game Chair
STEP 1
Begin assembly by attaching the Chair Back (J) to the Seat
Frame (K) using 2 Allen Bolts (A), 2 Spring Washers (E) & 2 Flat
Washers (F) per each back corner from the bottom, and 1 Allen
Bolt (C), 1 Spring Washer (E) & 1 Flat Washer (F) in the
center from the bottom. Do not fully tighten bolts.
STEP 2
Next attach each left and right Side Arm (L) to each
appropriate side of the Seat Frame (K) by aligning the holes
and securing each from the bottom with 2 Allen Bolts (B), 2
Spring Washers (E) & 2 Flat Washers (F) per each arm. Do
not fully tighten bolts.
STEP 3
Finish securing each Side Arm (L) to the Chair Back (J) by
aligning holes and securing from the bottom of the arm using 1
Allen Bolt (C) & 1 Spring Washer (E). Make sure dowel fits tightly
into hole on back panel. Tighten all bolts from Steps 1 through 3.
STEP 4
After removing the red cover, insert the Gas Lift (N) into the center area
of the Leg Base (O) and push in place. Connect the Gas Lift (N) to the
bottom of the Metal Plate (M) by screwing in place.
STEP 5
Attach the Metal Plate (M) to the bottom of the Chair Frame (K) with 4 Allen
Bolts (D), 4 Spring Washers (E) & 4 Flat Washers (F) to secure in place.
Make sure the lift handle is on the left side facing the chair.
STEP 6
Finally attach each Caster (G) to each leg bottom and tighten using the
Hex Wrench (J) that has been provided. The assembly is now complete.
HARDWARE LIST
A (4) Allen Bolts 1/4” x 2-3/4”
B (4) Allen Bolts 1/4” x 2”
C (3) Allen Bolts 1/4” x 1-1/2”
D (4) Allen Bolts 1/4” x 1”
E (15) Spring Washers
F (13) Flat Washers
G (5) Casters
H (1) Allen Wrench
I (1) Hex Wrench
PARTS LIST
J (1) Chair Back
K (1) Seat Frame
L (2) Side Arms (Left and Right)
M (1) Metal Plate
N (1) Gas Lift
O (1) Leg Base
QTYPART
5G
1I
HARDWARE QTYPART HARDWARE
1
H
15E 13F
3C 4D
4A 4B
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
* IMPORTANT*
Please remove the red
cover before assembly
AA
A
B
B
C
C
C
C
D
D
E
E
F
F
D
D
E
E
F
F
D
D
E
E
E
E
E
E
E
E
E
E
E
F
F
F
F
F
F
F
F
F
F
G
G
J
K
L
L
N
O
M
Make sure
Dowel fits into
hole on Back Panel
Make sure
handle is
on left side