Instructions / Assembly

ManualsBrandsHillsdale Furniture ManualsGame RoomPark View Brown Oak 5-Piece Gaming Table and Chairs

HARDWARE LIST

(4) Allen Bolts - 5/16 x 2-1/4

(12) Hex Nuts - 5/16

(16) Flat Washers - 5/16

(16) Spring Washers - 5/16

(1) Allen Wrench 4mm

(1) Hex Wrench 5/16

(1) Wood Push Rod

PARTS LIST

(1) Game Top

(1) Table Top

(1) Game Board

(1) Square Platform

(1) Table Column

(4) Legs

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure

that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult

assembly is required. Customer Service Phone Number: 502-562-0000

CARE & MAINTENANCE

The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for

polishing, as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.

Date:

08/12/09

FURNITURE, LLC.

HILLSDALE

PARK VIEW GAME TABLE

Model #4186-810 Table Top

Model #4186-811 Table Base

STEP 1

Begin assembly by attaching each Leg

(M) to the sides of the Table Column (L)

by inserting the threads from each leg

into the open holes and secure with 2

Flat Washers (C), 2 Spring Washers (D)

& 2 Hex Nuts (B) per each leg. Tighten

all nuts using the Hex Wrench (F) that

has been provided.

STEP 2

Attach the Square Platform (K) to the top of the

Table Column (L) by guiding the threads into the

open holes and securing from the top with 4 Flat

Washers (C), 4 Spring Washers (D) & 4 Hex Nuts

(B). Secure in place using the Hex Wrench (F).

STEP 3

Attach the Table Top (H) to the top of the Square

Platform (K) by aligning holes and securing from

the bottom with 4 Allen Bolts (A), 4 Spring Washers

(D) & 4 Flat Washers (C). Secure in place using the

Allen Wrench (E) that has been provided.

STEP 4

Place the Wood Push Rod (I) into the open hole on

the chessbox (so the Game Board can be flipped

and removed) and insert the Game Board (J) into

the open area on the Table Top. Once in place

carefully center the Game Top (G) on the top of the

Table Top to complete the assembly.

IMPORTANT: 4 Allen Bolts, 4 Spring Washers & 4

Flat Washers are pre-attached to the Square Platform.

Please remove before assembly.