Installation Guide

STEP 1
Begin assembly by first
attaching each Wood Post (F)
to Table Base (E) by firmly
screwing into place. Make sure
each post is tight in place, but
do not overtighten to prevent
damage.
Customer Service
Phone Number:
502 562-0000
Date: 04-27-05
PARTS LIST
(1) Table Base
(4) Wood Posts
(1) Table Top
(1) Drop Leaf
E
F
G
H
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need.
Please do not use harsh or abrasive cleaners for polishing, as they may cause damage to the finish. Periodic
checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to
insure that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference.
Adult assembly required. Online Parts Request: [e-mail]
FURNITURE, LLC.
HILL
SD
ALE
A
WILSHIRE ROUND TABLE
Model #4513-816 Carton A
Model #4513-817 Carton B
HARDWARE LIST
(4) Spring Washers
(4) Flat Washers
(4) Hex Nuts
(1) Open End Wrench
A
B
C
D
BC D
C
A
B
E
F
G
H
F
F
F
STEP 2
Slide open Table Top (G), or remove Drop
Leaf (H) from sectional. Attach each Wood
Post to Table Top by inserting each threaded
end on post through pre-drilled holes. Once
in place, hold tight using 1 Flat Washer (B),
1 Spring Washer (A) & 1 Hex Nut (C) per
each post. Tighten all nuts using the Open
End Wrench (D) provided.
STEP 3
Put Drop Leaf (H) in place on Table Top (G) and
push ends together to complete assembly.
C
A
B
C
A
B
C
A
B