Instructions / Assembly

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 01-21-2016
Page 1 of 1
EDENWOOD SWIVEL STOOL
Model #5945-826 Counter Stool
Model #5945-830 Barstool
STEP 2 - Figure 2
Next attach Legs (J) to Upper Support Ring (K) using 2 Allen
Bolts (B), 2 Spring Washers (D) and 2 Large Flat Washers (F)
per leg.
STEP 3 - Figure 2
Next attach Legs (J) to Lower Support Ring (L) using 1 Allen Bolt (B), 1
Spring Washer (D) and 1 Small Flat Washer (E) per leg. Tighten all
bolts from steps 2 and 3 with Allen Wrench (G) provided.
STEP 4 - Figure 2
Next attach Swivel Plate (M) to Upper Support Ring (K) using 4 Allen
Bolts (C), 4 Spring Washers (D) and 4 Large Flat Washers (F).
Tighten all bolts with Allen Wrench (G) provided.
STEP 5 - Figure 2
Finally attach Swivel Plate (M) to Seat Base (I) using 4 Allen
Bolts (C), 4 Spring Washers (D) and 4 Large Flat Washers (F).
Tighten all bolts with Allen Wrench (G) provided. The assembly
is now complete.
HARDWARE LIST
A (6) M6 x 50mm Allen Bolts
B (12) M6 x 45mm Allen Bolts
C (8) M6 x 30mm Allen Bolts
D (26) Spring Washers
E (4) 13mm Small Flat Washers
F (22) 20mm Large Flat Washers
G (1) Allen Wrench
PARTS LIST
H (1) Stool Back
I (1) Seat Base
J (4) Legs
K (1) Upper Support Ring
L (1) Lower Support Ring
M (1) Swivel Plate
QTYPART
6A
8C
HARDWARE QTYPART HARDWARE
12
26
B
D
4E
1G
22F
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
HDFBP
AA
A
A
B
B
C
C
D
D
D
D
D
D
E
E
F
F
F
F
H
I
FIGURE 1
DD
D
D
F
F
C
C
D
D
FF
F
F
B
B
I
J
K
L
M
FIGURE 2
STEP 1 - Figure 1
Begin assembly by attaching Seat Base (I) to Stool Back (H)
using 6 Allen Bolts (A), 6 Spring Washers (D) and 6 Large Flat
Washers (F). Tighten all bolts with Allen Wrench (G) provided.