Use and Care Manual

STEP 1
Begin assembly by attaching each Leg (K) to the
bottom of the Stool Top (J) using 2 Allen Bolts (A),
2 Spring Washers (D) & 2 Flat Washers (E) per
each leg. Do not fully tighten bolts.
STEP 2
Next attach the Support Ring (L) to each Leg Panel
(K) from the inside and secure to each leg with 1
Allen Bolt (B), 1 Spring Washer (D) & 1 Flat Washer
(E). Tighten bolts using the Allen Wrench (F) that
has been provided.
STEP 3
Next attach the Stool Back (G) to the Seat Base
(H) by insering posts in place and securing each
post with 1 Allen Bolt (B). Also secure from each
rear center metal tab with 1 Allen Bolt (C). Tighten
all bolts.
STEP 4
Finally attach the Seat Base (H) to the Stool Top
(J) by aligning holes with the swivel metal plate
and secure with 4 Allen Bolts (B), 4 Spring Washers
(D) & 4 Flat Washers (E). The assembly is now
complete.
E
D
A
E
D
B
AB F
HARDWARE LIST
(8) Allen Bolts 1/4 x 1/2
(10) Allen Bolts 1/4 x 1
(2) Allen Bolts 1/4 x 5/8
(16) Spring Washers 1/4
(16) Flat Washers 1/4
(1) Allen Wrench
A
B
C
D
E
F
PARTS LIST
(1) Stool Back
(1) Seat Base
(1) Stool Top
(4) Legs
(1) Support Ring
G
H
J
K
L
AMHERST SWIVEL STOOL
Model #4174-826 Swivel Counter Stool
Model #4174-830 Swivel Bar Stool
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for
polishing, as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
TOOLS NEEDED FOR ASSEMBLY
ALLEN WRENCH (SUPPLIED)
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure
that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult
assembly is required. Customer Service Phone Number: 502-562-0000
Date:
06/29/09
FURNITURE, LLC.
HILLSDALE
DEC
G
H
J
K
K
K
K
L
E
D
B
E
D
B
E
D
A
C
B