Instructions / Assembly

K
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 10-14-2014
Page 1 of 1
SULLIVAN WOOD OVAL DINING TABLE
Model #5636-5637-814 Table Top - Black & Ivory
Model #5636-5637-815 Table Base - Black & Ivory
HARDWARE LIST
A (12) Ø5/16” Spring Washers
B (4) Ø5/16" X 16D Flat Washers
C (8) Ø5/16" X 19D Flat Washers
D (4) Ø5/16" X 1-1/2" Bolts
E (1) 100 X 30 X 5mm Allen Wrench
F (8) Ø5/16" Nuts
G (1) Ø5/16" Hex Wrench
PARTS LIST
H (1) Table Top
I (1) Table Extension
J (1) Center Post
K (4) Legs
QTYPART
1E
1G
HARDWARE QTYPART HARDWARE
8
F
8C 4D
12A 4B
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
J
K
K
K
K
STEP 1 - Figure 1
Begin assembly by turning center post (J)
upside down on a clean smooth surface to
prevent scratching. Then attach each Leg (K)
with 2 Nuts (F), 2 Spring Washers (A) and 2
Flat Washers (C). Tighten all Bolts with Open
End Wrench (G) provided.
STEP 2 - Figure 2
Next slide open Table Top (H) or remove Table
Extension (I) from sectional. Attach Center
Post (J) to connector panel on the bottom side
of Table Top (H) with 4 Bolts (D), 4 Spring
Washers (A) and 4 Flat Washers (B). Tighten
all bolts with Allen Wrench (E) provided.
FF
A
A
C
C
J
K
FIGURE 1
Locked
NOTE: Each leg has
an adjustable leveler
located on the bottom.
This can be adjusted
by turning either
direction to level the
height of your table.
BB
B
B
D
D
D
D
A
A
A
A
H
H
J
J
FIGURE 2
FIGURE 3
STEP 3 - Figure 3
To use Table
Extension (I) unlock
the lock and move
each end of Table
Top (H) out. Fit Table
Extension (I) into
place and slide the
ends back in and
lock the locks.
I
H