Instructions

Network Dome Camera·Quick Start Guide

Steps:

1. Attach the dill template to the ceiling.

2. Drill the screw holes and cable hole (optional) in the ceiling

according to the drill template.

Note:

Cable hole is required when you adopt ceiling outlet to route the

cables.

Drill Template

Hole A: for cables routed through the ceiling

screw hole 1: for Mounting Base

3 Φ 4.5 mm (0.2'')

Φ 100.4 mm (4'')

Φ 111 mm (4.4'')

Drill Template Figure 2-1

3. Loosen the set screws with a hex wrench (supplied) to remove

the bubble.

Note:

The three screws are not required to be unscrewed totally.