Instructions

Network Dome Camera·Quick Start Guide
15
15
5. Route the cables through the cable hole.
Note:
If required, you can route cables through the side opening on the
side of the mounting base.
Side Opening
Side Opening Figure 2-4
6. Connect the corresponding cables, such as power cable and
network cable.
7. Power on the camera, and set the network configuration (for
details, refer to 3 Set the Network Camera over the LAN and 4
Access via Web Browser) to check whether the image is gotten
from the optimum angle. If not, adjust the surveillance angle.
P: 0° to 355°
T: 0° to 75°
Tilt Adjusting Screw
Type I Camera 2-Axis Adjustment Figure 2-5