Instructions

Table Of Contents

Network Speed Dome·Quick Start Guide

5 Operating via Hik-Connect App

Purpose:

Hik-Connect is an application for mobile devices. With the App, you can view live image

of the speed dome, receive alarm notification and so on.

Note:

Hik-Connect service is not supported by certain speed dome models.

5.1 Enable Hik-Connect Service on Speed Dome

Purpose:

Hik-Connect service should be enabled on your speed dome before using the service.

You can enable the service through SADP software or web browser.

5.1.1 Enable Hik-Connect Service via SADP Software

Steps:

1. Check Enable Hik-Connect on:

1). "Activate the Device" page during speed dome activation, refer to Section 3.2.2

Activation via SADP Software.

2). Or "Modify Network Parameters" page during modifying IP address, refer to

Section 3.3 Modifying the IP Address.

2. Create a verification code or change the verification code.

Figure 5-1 Verification Code Setting (SADP)

Note:

The verification code is required when you add the speed dome to Hik-Connect app.

3. Click and read "Terms of Service" and "Privacy Policy".