Instructions

Network Turret Camera·Quick Start Guide
16
8. Power on the camera, and set the network configuration. For
details, refer to 3 Set the Network Camera over the LAN and 4
Access via Web Browser.
9. Adjust the surveillance angle.
Rotation: 0 to 360°
Pan: 0 to 360°
Tilt: 0 to 75°
Adjust Surveillance Angle
1). Hold the camera body and rotate the enclosure to adjust the
pan angle [0° to 360°].
2). Move the camera body up and down to adjust the tilt angle [0°
to 75°].
3). Rotate the camera body to adjust the rotation angle [0° to
360°].
Wall Mounting
Before you start:
● Type I and Type II both support wall mounting and the steps are
similar. Here takes type II as an example to describe the steps.
● You need to purchase a wall mounting bracket separately.