Use and Care Manual

1
en
It is essential that the operating instructions
are read before the tool is operated
for the first time.
Always keep these operating instructions
with the tool.
Ensure that the operating instructions are
with the tool when it is given to other
persons.
SD 4500 / SD 2500 drywall screwdrivers
1. General information
1.1 Safety notices and their meaning
-CAUTION-
Draws attention to a potentially dangerous situation that
could lead to minor personal injury or damage to the
equipment or other property.
-NOTE-
Draws attention to instructions and other useful infor-
mation.
1.2 Pictograms
Contents Page
1. General information 1
2. Description 2
3. Tools and accessories 3
4. Technical data 3
5. Safety rules 4
6. Before use 5
7. Operation 6
8. Care and maintenance 7
9. Disposal 7
10. Manufacturer's warranty – tools 7
Operating controls and parts 

1
/4″ chuck (for bit holder, magazine bit)
 Adjustable depth gauge (with bit change function)
 Tool / accessory interface (click connection)
 Coupling system / gearing
 Motor
 Belt hook
 Motor cooling air intake
 Lockbutton for sustained operation
 Supply cord
 On / off switch (with electronic speed control)
 Forward / reverse switch
 Type plate
 Cooling air exit with controlled air flow
 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the SD 4500 and / or
SD 2500 screwdriver is referred to as «the power tool».
Location of identification data on the power tool
The type designation can be found on the rating plate
and the serial number on the side of the motor housing.
Make a note of this data in your operating instructions
and always refer to it when making an enquiry to your
Hilti representative or service department.
Type:
Serial No.:
Warning signs
Obligation signs
Wear eye
protection
Read the operating
instructions
before use.
Symbols
General
warning
Warning:
electricity
Return waste
material for
recycling