SDS

Li-Ion Batteries >100 Wh
Safety information for Lithium-Ion batteries
Date of issue: 14/03/2018 Revision date: 14/03/2018 Supersedes: 17/11/2017 Version: 5.10
06/07/2018
EN (English)
1/6
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifier
Hilti B 18 / 5.2 Li-Ion (01), Hilti B 22 / 5.2 Li-Ion (01), Hilti B 22 / 8.0 Li-Ion (01), Hilti B 36 / 3.0
Li-Ion (01), Hilti B 36 / 3.3 Li-Ion (01), Hilti B 36 / 3.9 Li-Ion (01), Hilti B 36 / 5.2 Li-Ion (01),
Hilti B 36 / 6.0 Li-Ion (01), Hilti B 36 / 9.0 Li-Ion (01)
Relevant identified uses of the substance or mixture and uses advised against
Rechargeable Lithium Ion battery for power tools
Manufacturer/Supplier
Supplier
Hilti, Inc.
Legacy Tower, Suite 1000
7250 Dallas Parkway
TX 75024 Plano - USA
T +1 9724035800
1-800-879-8000 toll free - F +1 918 254 0522
Department issuing data specification sheet
Hilti Entwicklungsgesellschaft mbH
Hiltistraße 6
86916 Kaufering - Deutschland
T +49 8191 906310 - F +49 8191 90176310
anchor.hse@hilti.com
SECTION 2: Hazards identification
For the battery chemical materials are stored in a hermetically sealed metal case, designed to withstand Temperatures and pressures encountered
during normal use. As a result, during normal use there is no physical danger of ignition or explosion and chemical danger of hazardous materials
leakage.
It may cause heat generation or electrolyte leakage if battery terminals contact with other metals. Electrolyte is flammable. In case of electrolyte
leakage move the battery from fire immediately.
However if exposed to a fire, added mechanical shocks, decomposed, added electric stress by miss-use, the gas release vent will be operated. The
battery case will be breaked at the extreme, hazardous materials may be released.
Moreover, if heated strongly by a surrounding fire, acrid gas may be emitted.
SECTION 3: Composition/information on ingredients
Lithium Ion rechercheable battery pack:
Name/Type Energy content (Wh)
Hilti B 18 / 5.2 Li-Ion (01) 112
Hilti B 22 / 5.2 Li-Ion (01) 112
Hilti B 22 / 8.0 Li-Ion (01) 172,8
Hilti B 36 / 3.0 Li-Ion (01) 108
Hilti B 36 / 3.3 Li-Ion (01) 118,8
Hilti B 36 / 3.9 Li-Ion (01) 140,4
Hilti B 36 / 5.2 Li-Ion (01) 187,2
Hilti B 36 / 6.0 Li-Ion (01) 216
Hilti B 36 / 9.0 Li-Ion (01) 324
This product contains a positive electrode (Lithium cobalt oxide (CAS-No. 12190-79-3)), a negative electrode (graphite (CAS-No. 7782-42-5)) and
electrolyte (ethylene carbonate(CAS-No. 96-49-1), diethyl carbonate (CAS-No. 105-58-8) and lithium hexafluorophosphate (CAS-No. 21324-40-3)).
The physical form of the product, however, precludes exposure to workers under normal conditions of use.
SECTION 4: First aid measures
Description of first aid measures
If the electrolyte is leaking out of the battery pack, the following measures have to be taken.
Assure fresh air breathing. Allow the victim to rest.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed
by warm water rinse. If skin irritation or rash occurs: Get medical advice/attention.

Summary of content (6 pages)