SDS

Li-Ion Batteries >100 Wh
Safety information for Lithium-Ion batteries
06/07/2018
EN (English)
3/6
SECTION 7: Handling and storage
Precautions for safe handling
Precautions for safe handling
Do not soak in water or seawater.
Do not expose to strong oxidizers.
Do not give a strong mechanical shock or fling.
Never disassemble, modify or deform.
Do not connect the positive terminal to the negative terminal with electrically conductive
material.
Use only the chargers / electric tools specified by Hilti to charge or discharge the battery.
Do not throw into fire or expose to high temperatures (>85 °C).
Do not connect the positive terminal to the negative terminal with electrically conductive
material.
Hygiene measures
Always wash hands after handling the product.
Conditions for safe storage, including any incompatibilities
Storage conditions
Avoid direct sunlight, high temperature, high humidity.
Store in a cool place (temperature: -20 °C ~ 40 °C, humidity: 45 - 85%).
Incompatible products
Strong bases. Strong acids.
Incompatible materials
Sources of ignition. Direct sunlight.
Storage temperature
-20 - 40 °C
Information on mixed storage
Store away from water.
Do not store together with electrically conductive materials.
The accu-pack should be stored at 30 to 50% of the charging capacity.
Avoid storing in places where it is exposed to static electricity.
SECTION 8: Exposure controls/personal protection
Exposure controls
Appropriate engineering controls
If the electrolyte is leaking out of the battery pack, the following measures have to be taken.
Personal protective equipment
Avoid all unnecessary exposure.
Hand protection
Wear protective gloves.
Type
Material
Permeation
Thickness (mm)
Standard
Disposable gloves
Nitrile rubber (NBR)
6 (> 480 minutes)
0,12
EN 374
Eye protection
Chemical goggles or safety glasses
Other information
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Appearance
plastic case.
Colour
red. Black.
Explosive properties
Risk of explosion by shock, friction, fire or other sources of ignition.