SDS

Page 3/8
Safety Data Sheet
acc. to ISO 11014
Printing date 05/18/2015 Reviewed on 05/18/2015Version number 5
Trade name:
B 18 / 5.2 Li-Ion B 22 / 5.2 Li-Ion B 36 / 3.0 Li-Ion B 36 / 3.3 Li-Ion
B 36 / 3.9 Li-Ion B 36 / 6.0 Li-Ion
B 7 / 1.5 Li-Ion B 12 / 2.6 Li-Ion B 14 / 1.6 Li-Ion B 14 / 3.3 Li-Ion
B 18 / 1.6 Li-Ion B 18 / 2.6 Li-Ion B 18 / 3.3 Li-Ion B 22 / 1.6 Li-Ion
B 22 / 2.6 Li-Ion B 22 / 3.3 Li-Ion B 36 / 2.4 Li-Ion B 36 / 2.6 Li-Ion
B 144 / 2.6 Li-Ion POA 80 POA 84 POA90 PRA 84 PRA 84 02
PRA 84 G PSA 81 PSA 82 AI E20 AI E21
(Contd. of page 2)
40.1.3
4 First-aid measures
·
Description of first aid measures
·
General information
This product contains an organic electrolyte. If the electrolyte is leaking out of the battery pack, the following measures
have to be taken.
·
After inhalation
Take affected persons into fresh air and keep quiet.
Supply fresh air or oxygen; call for doctor.
·
After skin contact
Immediately wash with water and soap and rinse thoroughly.
·
After eye contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
·
After swallowing
Seek immediate medical advice.
·
Information for doctor
·
Most important symptoms and effects, both acute and delayed
No further relevant information available.
·
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
5 Fire-fighting measures
·
Extinguishing media
·
Suitable extinguishing agents
CO2, extinguishing powder or water spray. Fight larger fire with alcohol resistant foam.
Foam
·
Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
·
Advice for firefighters
·
Protective equipment:
Wear self-contained respiratory protective device.
Wear fully protective suit.
Ensure adequate ventilation
6 Accidental release measures
·
Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation
Wear protective equipment. Keep unprotected persons away.
Keep away from ignition sources
Keep people at a distance and stay upwind.
·
Environmental precautions:
Do not allow to penetrate the ground/soil.
·
Methods and material for containment and cleaning up:
Pick up mechanically.
Absorb liquid components with liquid-binding material.
·
Reference to other sections
See Section 7 for information on safe handling
7 Handling and storage
·
Handling
·
Precautions for safe handling
Do not soak in water or seawater.
Do not expose to strong oxidizers.
Do not give a strong mechanical shock or fling.
Never disassemble, modify or deform.
Do not connect the positive terminal to the negative terminal with electrically conductive material.
Use only the chargers / electric tools specified by Hilti to charge or discharge the battery.
No special measures required.
(Contd. on page 4)
US EN