SDS

Page 4/8
Safety Data Sheet
acc. to ISO 11014
Printing date 05/18/2015 Reviewed on 05/18/2015Version number 5
Trade name:
B 18 / 5.2 Li-Ion B 22 / 5.2 Li-Ion B 36 / 3.0 Li-Ion B 36 / 3.3 Li-Ion
B 36 / 3.9 Li-Ion B 36 / 6.0 Li-Ion
B 7 / 1.5 Li-Ion B 12 / 2.6 Li-Ion B 14 / 1.6 Li-Ion B 14 / 3.3 Li-Ion
B 18 / 1.6 Li-Ion B 18 / 2.6 Li-Ion B 18 / 3.3 Li-Ion B 22 / 1.6 Li-Ion
B 22 / 2.6 Li-Ion B 22 / 3.3 Li-Ion B 36 / 2.4 Li-Ion B 36 / 2.6 Li-Ion
B 144 / 2.6 Li-Ion POA 80 POA 84 POA90 PRA 84 PRA 84 02
PRA 84 G PSA 81 PSA 82 AI E20 AI E21
(Contd. of page 3)
40.1.3
·
Information about protection against explosions and fires:
Do not throw into fire or expose to high temperatures (>85 °C).
Do not connect the positive terminal to the negative terminal with electrically conductive material.
·
Conditions for safe storage, including any incompatibilities
·
Storage
·
Requirements to be met by storerooms and receptacles:
Avoid direct sunlight, high temperature, high humidity.
Store in a cool place (temperature: -20 °C ~ 35 °C, humidity: 45 - 85%)
·
Information about storage in one common storage facility:
Store away from water.
Do not store together with electrically conductive materials.
·
Further information about storage conditions:
The accu-pack should be stored at 30 to 50% of the charging capacity.
Avoid storing in places where it is exposed to static electricity.
·
Specific end use(s)
No further relevant information available.
8 Exposure controls/personal protection
·
Additional information about design of technical systems:
No further data; see item 7.
·
Control parameters
·
Components with limit values that require monitoring at the workplace:
No technical measures are necessary during normal use. In case of leakage of substances contained within the cell, the
information below may be useful.
·
Additional information:
The lists that were valid during the creation were used as basis.
·
Exposure controls
·
Personal protective equipment
·
General protective and hygienic measures
The usual precautionary measures for handling chemicals should be followed.
·
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
·
Protection of hands:
Protective gloves.
EN 374
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
·
Material of gloves
Nitrile rubber, NBR
Recommended thickness of the material:

0.12 mm
·
Penetration time of glove material
Value for the permeation: Level 6 (> 480 min)
·
Eye protection:
Tightly sealed goggles.
(Contd. on page 5)
US EN