Operating Instruction AG 500-A22 (02)

8 English 2149239
*2149239*
3.5 Guard with front cover 2
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications,
use the standard guard with front cover.
3.6 DC-EX 125/5"C compact dust hood for cutting (accessory) 3
When cutting mineral materials with diamond cutting discs, use the DC-EX 125/5" C compact hood.
CAUTION Use of this hood for working on metal is prohibited.
3.7 DG-EX 125/5" dust hood for grinding (accessory) 4
The grinding system is suitable only for occasional use with diamond cup wheels for grinding mineral
materials.
CAUTION Use of this hood for working on metal is prohibited.
3.8 Li-ion battery charge status display
The charge status of the Liion battery is displayed after one of the two battery release buttons is pressed.
Status Meaning
4 LEDs light. Charge status: 75 % to 100 %
3 LEDs light. Charge status: 50 % to 75 %
2 LEDs light. Charge status: 25 % to 50 %
1 LED lights up. Charge status: 10 % to 25 %
1 LED blinks. Charge status: < 10 %
Indication of the charge status is not possible while the power tool is in operation or immediately
after operation. If the battery charge status LEDs blink, please refer to the information given in the
Troubleshooting section.
4 Consumables
Only synthetic resin-bonded, fiber-reinforced discs with a maximum Ø of 5" which are approved for use at a
rotational speed of at least 11000/min and a peripheral speed of 80 m/s may be used.
The maximum grinding disc thickness is 1/4" and the maximum cutting disc thickness is 1/8".
WARNING! When cutting or slitting with abrasive cutting discs always use the standard guard with
the additional front cover, or a fully enclosing dust hood.
Discs
Application Designation Material
Abrasive cutting disc Cutting, slitting ACD Metal
Diamond cutting disc Cutting, slitting DC-TP, DC-D (SPX,
SP, P)
Mineral
Abrasive grinding disc Rough grinding AG-D, AF-D, AN-D,
AG-D type 27
Metal
Diamond grinding disc Rough grinding DG-CW (SPX, SP,
P)
Mineral
Wire brushes Wire brushes 3CS, 4CS, 3SS,
4SS
Metal
Suitability of discs for the equipment used
Item Equipment ACD AG-D AF-D AN-D DG-
CW
(SPX,
SP, P)
DC-TP,
DC-D
(SPX,
SP, P)
3CS,
3SS,
4CS,
4SS
AG-D
type 27
A Guard X X X X X X X —