Operating Instruction SL 2-A12 (01), SL 2-A22 (1)

Table Of Contents
2 English
1.3 Product information
Hilti products are designed for professional use and may be operated, ser-
viced and maintained only by trained, authorized personnel. This personnel
must be informed of any particular hazards that may be encountered. The
product and its ancillary equipment can present hazards if used incorrectly
by untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are stated on the rating plate.
Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to inquire about the product.
Product information
Cordless lamp SL2-A12 | SL2-A22
Generation 01
Serial no.
1.4 Declaration of conformity
We declare, on our sole responsibility, that the product described here
complies with the applicable directives and standards. A copy of the
declaration issued by the certification department can be found at the end
of this documentation.
The technical documentation is filed and stored here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916
Kaufering, Germany
2 Safety
2.1 Important safety instructions
WARNING! READ ALL INSTRUCTIONS. Failure to follow all instructions
listed below can result in electric shock, fire and/or serious injury. KEEP
THESE INSTRUCTIONS IN A HANDY YET SECURE PLACE.
2.2 Careful handling and use
Use the product only when it is in perfect working order.
Never tamper with or modify the product in any way.
This device can be used by children 8 years of age or older and by persons
with physical, sensory or mental disabilities or little relevant experience or
know-how if they are supervised or have received instruction on the safe
use of the device and the resulting hazards.
Do not use the product where there is a risk of fire or explosion.
Do not use the device outdoors.
Do not use accessories not specifically intended and recommended for
this power tool by the tool manufacturer. The fact that an accessory can
Printed: 21.04.2017 | Doc-Nr: PUB / 5346559 / 000 / 00