Operating Instruction SL 2-A12 (01), SL 2-A22 (1)

4 English
SL 2-A22
Use only Hilti Liion batteries of the B 22 series with this product.
▶ Use only the Hilti battery chargers of the C4/36 series for charging these
batteries.
3.3 Charge state indicator
Lightly press (no more than until resistance is perceptible) either of the
battery release buttons to check the charge state of the Liion battery.
Status Meaning
4 LEDs light up. • Charge state: 75 % to 100 %
3 LEDs light up. • Charge state: 50 % to 75 %
2 LEDs light up. • Charge state: 25 % to 50 %
1 LED lights up. • Charge state: 10 % to 25 %
1 LED flashes. • Charge state: < 10 %
Note
If the LEDs of the charge state indicator flash, follow the instructions in
the 'Troubleshooting' section.
3.4 3-mode switch
Use the 3-mode switch to set the brightness.
Status Meaning
Press once • The lamp lights with maximum
brightness.
Press twice • The lamp lights with medium
brightness.
Press three times • The lamp is off.
3.5 Items supplied
Cordless lamp, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Center or online at: www.hilti.com
Printed: 21.04.2017 | Doc-Nr: PUB / 5346559 / 000 / 00